Rocketry

The rocketry components that you find here are a culmination of years of my experience as an electronics engineer being involved in high power rocketry.  The components that I have developed are used in the design and fabrication of rockets with emphasis on deployment and tracker electronic bays.  The electronic bay components allow for the re-use of bays between rockets and also to allow bays to be reconfigured as technology changes without having to rebuild completely.  At this time, I am releasing a variety of parts for the use in general electronic bays and 54mm coupler tube electronic bays.  There are also a few general purpose "assistants" to make building easier.

You can get an overview of the product line on the Diagrams, How To's & Concepts page which details wiring, assembly, and concepts.

I hope that you find the products of interest and would like to incorporate them into your next rocket.

 

 

View as Grid List
Sort by
Display per page

4 Post Feedthru Kit

DF4P-00105
The 4 post feedthru supplies an insulated connection from the internal electronics bay to the outside for igniters, electric matches, or other electronics.
$3.45

Four Color Wire Kit

WR4C-00137
This kit contains four five foot lengths of 22 AWG stranded wire in different colors - yellow, orange, blue & brown.
$2.95

Ten Color Wire Kit

WR10C-00138
This kit contains ten five foot lengths of 22 AWG stranded wire in different colors - yellow, orange, blue, brown, red, black, white, grey, green, and violet
$5.95

SMA Connector Clip

SMACC-00135
The SMA connector clip is designed to support a commercial radio transceiver in a tracking electronics bay.
$0.50

Dev PCB Boards Kit

DPCB-00139
The Dev PCB boards are 60mm by 40mm and mount to the DEV sleds with the included hardware.
$1.95

38mm CT 2 Post Deploy Float Bulkhead Kit

BHC2P-00300
The 2 post deploy float bulkhead is designed to be a sealed wall against deployment ejection gases when epoxied in place and allow for two contact connections to an electric match or igniter.
$2.95

38mm CT 2 Post Deploy Cap Kit

CC2P-00303
The CT 2 post deploy end cap is designed to be a sealed wall against deployment ejection gases when mounted in place and allows for two outside connections to an electric match or igniter.
$2.95

38mm CT Deploy Mounting Ring Kit

DSC-00325
This ring provides three 4-40 threaded inserts for mounting caps and bulkheads which can be for deployment or such things as antenna connections and there are three 6-32 machine screw nuts at 120 degree intervals for mechanically securing the ring inside of a coupler tube if needed.
$2.45

38mm CT End Plate Kit

EPC-00323
The end plate kit was designed to provide a sled mounting tab. The end plate can be mounted to any of the other 38m parts that has SMT Designs' standard ring pattern.
$1.45

38mm CT Mounting Ring Kit

MRC6-00335
This mounting ring provides three 6-32 machine screw nuts at 120 degree intervals inside of a coupler tube.
$1.95

54mm CT Float Bulkhead

BHC-00524
The 54mm CT Float bulkhead is a do it yourself part. It has SMT Designs' standard ring pattern on one side (hole depth is 5mm) so it can be attached to any of the other SMT Designs parts that have the same pattern.
$1.95

54mm O-Ring Kit

OR-00528
The O-ring kit contains four O-rings that can be used to seal the ends of tubular bays when required.
$1.45