Rocketry

The rocketry components that you find here are a culmination of years of my experience as an electronics engineer being involved in high power rocketry.  The components that I have developed are used in the design and fabrication of rockets with emphasis on deployment and tracker electronic bays.  The electronic bay components allow for the re-use of bays between rockets and also to allow bays to be reconfigured as technology changes without having to rebuild completely.  At this time, I am releasing a variety of parts for the use in general electronic bays and 54mm coupler tube electronic bays.  There are also a few general purpose "assistants" to make building easier.

You can get an overview of the product line on the Diagrams, How To's & Concepts page which details wiring, assembly, and concepts.

I hope that you find the products of interest and would like to incorporate them into your next rocket.

 

 

View as Grid List
Sort by
Display per page

BT60 Internal 1/4" Motor Retainer Kit

BTMR-02310
The BT60 internal 1/4" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has a Loki forward closure with a 1/4-20 threaded end.
$14.95

BT60 Internal 5/16" Motor Retainer Kit

BTMR-01310
The BT60 internal 5/16" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has an Aerotech forward closure with a 5/16 threaded end.
$14.95

BT60 to 38mm Nosecone Bay Adapter

NCAD60-00385
The BT60 to 38mm Nosecone Bay Adapter can be used with a Mach1 "Estes" type nosecone to allow for the installation of a standard 38mm SMT Designs nosecone bay.
$3.45

38mm Compact Six Inch Bay Kit

BKC-20165
The compact bay kit in a complete set of SMT Designs parts that can be assembled into fully functional dual deploy electronics bay (customer supplies coupler tube, altimeter, 2S LiPo battery, and PVC pipe ends).
$22.95

38mm Internal 1/4" Motor Retainer Kit

BTMR-20310
The 38mm internal 1/4" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has a Loki forward closure with a 1/4 threaded end.
$14.95

Mach1 BT60 Hybrid Bay Kit

BKC-00367
The BT60 hybrid bay kit is a complete set of SMT Designs parts that can be assembled into fully functional dual deploy electronics bay (customer supplies coupler tube, altimeter, & battery) for Mach1's thin wall fiberglass tubing.
$27.95

38mm Internal 5/16" Motor Retainer Kit

BTMR-00310
The 38mm internal 5/16" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has an Aerotech forward closure with a 5/16 threaded end.
$14.95

38mm Nosecone Bay Kit

BKNC-20166
The nosecone bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional nosecone bay for trackers or other electronic devices (customer supplies coupler tube, electronic device, and batteries).
$13.95

AltusMetrum EasyMini Carrier Kit

ACAMEM-00176
This is an altimeter carrier for the AltusMetrum EasyMini dual deployment altimeter.
$2.45

38mm Enclosed Bay Kit

BKEN-00168
The enclosed bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional enclosed bay for trackers or other electronic devices (customer supplies coupler tube, electronic device, and batteries).
$15.95

EggTimer Quark Carrier Kit

ACETQK-00175
This is an altimeter carrier for the EggTimer Quark dual deployment altimeter.
$2.45

38mm Standard Eight Inch Bay Kit

BKC-21365
The standard bay kit is a complete set of SMT Designs parts that can be assembled into fully functional dual deploy electronics bay (customer supplies coupler tube, altimeter, 2S LiPo battery, and PVC pipe ends).
$23.25