Rocketry

The rocketry components that you find here are a culmination of years of my experience as an electronics engineer being involved in high power rocketry.  The components that I have developed are used in the design and fabrication of rockets with emphasis on deployment and tracker electronic bays.  The electronic bay components allow for the re-use of bays between rockets and also to allow bays to be reconfigured as technology changes without having to rebuild completely.  You will find support for 38mm BT60, 54mm, 65mm, and 75mm for all types of bays. There are also general purpose "assistants" to make building easier for wiring and marking holes for mounting.

You can get an overview of the product line on the Diagrams, How To's & Concepts page which details wiring, assembly, and concepts.

I hope that you find the products of interest and would like to incorporate them into your next rocket.

View as Grid List
Sort by
Display per page

Tie Wrap Loops Kit

TWL-00162
The tie wrap loops are used in traditional electronic bays to organize and support wiring on your sled.
$2.45

4 Terminal Through Mount Connector Block Kit

CB4TM-00106
The 4 terminal connector block kit is designed to be used inside of a more traditional electronics bay.
$2.45

4 Terminal Tab Mount Connector Block Kit

CB4EM-00107
The 4 terminal tab mount connector block kit is designed to be used inside of a more traditional electronics bay.
$2.45

4 Terminal Mating Connector Kit

CM4T-00108
The 4 terminal mating connector kit is designed to be used inside of a more traditional electronics bay.
$1.45

Four Color Wire Kit

WR4C-00137
This kit contains four five foot lengths of 22 AWG stranded wire in different colors - yellow, orange, blue & brown.
$3.45

Ten Color Wire Kit

WR10C-00138
This kit contains ten five foot lengths of 22 AWG stranded wire in different colors - yellow, orange, blue, brown, red, black, white, grey, green, and violet
$6.95

SMA Connector Clip

SMACC-00135
The SMA connector clip is designed to support a commercial radio transceiver in a tracking electronics bay.
$0.50

Dev PCB Boards Kit

DPCB-00139
The Dev PCB boards are 60mm by 40mm and mount to the DEV platforms with the included hardware.
$1.95

Bay Connector Wiring Kit

BWK-00102
The bay connector wiring kit includes all the parts necessary to add a DE9 female connector to a traditional electronics bay sled to connect to a SMT Designs' sled.
$2.45

Platform Connector Wiring Kit

SWK-00100
The Platform connector wiring kit includes all the parts necessary to add a DE9 male connector to any of the SMT Designs' parts that have a connector cutout.
$1.95

SMT Designs NRE Donation

NRE-99999
Non-recurring engineering (NRE) refers to the one-time cost to research, design, develop and test a new product or product enhancement.
$1.00