MissileWorks T3 Receiver Case Kit

The MissileWorks T3 Receiver Case Kit is a complete set of SMT Designs parts that can be assembled into a handheld case (belt clip included) specifically for the MissileWorks T3 receiver and 1S 750mAh LiPo battery (customer supplies T3 receiver, RPSMA antenna, and battery).
Manufacturer: SMT Designs
SKU: TRRX-43197
Shipping date: 5 - 40 days depending on order size
$24.95

The MissileWorks T3 Receiver Case Kit is a complete set of SMT Designs parts that can be easily assembled into a handheld case (belt clip included) specifically for the MissileWorks T3 receiver and 1S 750mAh LiPo battery (customer supplies T3 receiver, RPSMA antenna, and battery).

Features

  • power switch with positive retention to prevent unit from turning off accidently
  • battery is held in place by a retaining strap
  • antenna RPSMA connector is mounted through case wall for added support

Contents

  • one T3 Case
  • one T3 Case Cover Plate
  • one T3 Case Belt Clip
  • one T3 Case Battey Retainer
  • wire and all necessary hardware to assemble the case

Specifications

  • Case Dimensions 3 3/8 inches high, 2 3/4 inches wide, and 1.1 inches deep (depth is 1.5 inches with belt clip attached). Height with RPSMA antenna is 11 1/4 inches
  • Weight (assembled with T3 and battery) 5.7 ounces

Customer Supplied Parts

  1. One MissileWorks T3 receiver
  2. One 750mAh 1S LiPo battery
Customers who bought this item also bought

MissileWorks LCD Field Case Kit

FLDC-45198
The MissileWorks LCD Field Case Kit is a complete set of SMT Designs parts that can be assembled into a handheld case specifically for the MissileWorks LCD display module that is used for programming their RRC3 altimeter (customer supplies LCD display module).
$9.95

54mm, 65mm, 75mm Hybrid Bay Kits

BKC-20587
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$24.95

Device Carrier Kits

HDC-BTDC
Device carriers are used to mount smaller electronic devices (RRC2+ sized) in SMT Designs hybrid bays. Of note, they can also be used as small footprint device mounts for a more traditional bay design to allow for easier device migration when upgrading the bay.
$2.95

38mm/BT60 BT Bay Template

BTBT-00352
The 38mm/BT60 BT Bay Template is used to mark holes on body tubes to align with a coupler tube bay or other parts.
$3.45