The BT60 parts shown here are compatible with Mach1 Rocketry's thin wall fiberglass tubing. Please check with us if you are interested in other BT60 parts or a different manfacturer's tubing.
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
The BT60 internal 1/4" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has a Loki forward closure with a 1/4-20 threaded end.
The BT60 internal 5/16" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has an Aerotech forward closure with a 5/16 threaded end.
The BT60 to 38mm Nosecone Bay Adapter can be used with a Mach1 "Estes" type nosecone to allow for the installation of a standard 38mm SMT Designs nosecone bay.
The BT60 hybrid bay kit is a complete set of SMT Designs parts that can be assembled into fully functional dual deploy electronics bay (customer supplies coupler tube, altimeter, & battery) for Mach1's thin wall fiberglass tubing.
This is an altimeter carrier for the AltusMetrum EasyMini dual deployment altimeter.
This is an altimeter carrier for the EggTimer Quark dual deployment altimeter.
This is an altimeter carrier for the MissileWorks RRC2+ deployment altimeter.
This is an altimeter carrier for the PerfectFlite StratoLoggerCF dual deployment altimeter.
This is a 9 volt battery carrier.
This is a 2S 300mAh LiPo battery carrier.
The Charge Canister/Shock Cord Tie Plates consists of two replacement plates that can be used once the last set is no longer serviceable. These parts are compatible with the Mach1 BT60 bay kits.
The BT60 CT Bay Template is used to mark holes for 4-40 hardware on a BT60 coupler tube bay.