Bay Components

View as Grid List
Sort by
Display per page

BT60 Internal 1/4" Motor Retainer Kit

BTMR-02310
The BT60 internal 1/4" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has a Loki forward closure with a 1/4-20 threaded end.
$14.95

BT60 Internal 5/16" Motor Retainer Kit

BTMR-01310
The BT60 internal 5/16" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has an Aerotech forward closure with a 5/16 threaded end.
$14.95

BT60 to 38mm Nosecone Bay Adapter

NCAD60-00385
The BT60 to 38mm Nosecone Bay Adapter can be used with a Mach1 "Estes" type nosecone to allow for the installation of a standard 38mm SMT Designs nosecone bay.
$3.45

Replacement Charge Canister/Shock Cord Tie Plates

SCTP-00186
The Charge Canister/Shock Cord Tie Plates consists of two replacement plates that can be used once the last set is no longer serviceable. These parts are compatible with the Mach1 BT60 bay kits.
$1.50

BT60 CT Bay Template

CTBT-01351
The BT60 CT Bay Template is used to mark holes for 4-40 hardware on a BT60 coupler tube bay.
$1.95

38mm/BT60 BT Bay Template

BTBT-00352
The 38mm/BT60 BT Bay Template is used to mark holes on body tubes to align with a coupler tube bay or other parts.
$3.45

38mm DD End Cap

EC-00323
The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$1.45

54mm DD End Cap

EC-00523
The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$2.45

65mm DD End Cap

EC-00623
The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$3.45

75mm DD End Cap

EC-00723
The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$4.45

98mm DD End Cap

EC-00923
The DD (Dual Deploy) End Cap is a 7.1mm (0.28") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$5.45

BT60 DD End Cap

EC-00423
The BT60 DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$1.45