75mm CT Bay Template

The 75mm CT Bay Template is used to mark holes and window locations when constructing a coupler tube bay.
Manufacturer: SMT Designs
SKU: CTBT-00751
Shipping date: 5 - 40 days depending on order size
*

Note: This is not an all encompassing list. Manufacturers do change their

products, add new materials, and can be different between sizes of tubing.

Please measure to assure a proper fit.

Thin Wall (select if wall thickness is 1.1mm or under)

Mach1 BT55, BT60 - 1.1mm

Normal Wall (select if wall thickness is over 1.1mm

and 1.6mm or under)

Blue Tube 2.0 - 1.6mm

LOC Cardboard - 1.52mm

PML Phenolic - 1.5mm

Thick Wall (select if wall thickness is over 1.6mm

and 2.1mm or under)

MadCow - 1.9mm

Rocketry Warehouse (Proline) - 2.1mm

Ultra Thick Wall (select if wall thickness is over

2.1mm and 2.6mm or under)

LOC (larger tubes) - 2.6mm

$4.95

The 75mm CT Bay Template is used to mark holes when constructing a coupler tube bay. There are holes at 120 degree intervals at 6.35mm (1/4 inch) from the end of the coupler tube for bay mounting. There are two additional holes at the same distance to locate one or two arming switch locations. Finally, there is a single hole at 18.05mm (3/4 inch) for a vent hole if using the bay for deployment or air pressure monitoring.

Contents

  • One 75mm CT Bay Template

Specifications

  • Diameter mm
  • Length mm
  • Weight g
Customers who bought this item also bought

75mm BT Bay Template

BTBT-00752
The 75mm BT Bay Template is used to mark hole locations in a body tube for the mounting of a coupler tube bay.
$4.95

Standalone Modular Nosecone Bay Kits

SMNC
The Standalone Modular Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies device and battery).
$17.95

38mm CT Bay Template

CTBT-00351
The 38mm CT Bay Template is used to mark holes for drilling when constructing a coupler tube bay.
$2.45

54mm, 65mm, 75mm Hybrid Bay Kits

BKC-20587
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$24.95