38mm Enclosed Bay Kit

The enclosed bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional enclosed bay for trackers or other electronic devices (customer supplies coupler tube, electronic device, and batteries).
Manufacturer: SMT Designs
SKU: BKEN-00168
Shipping date: 2 - 14 business days depending on order size
*

Thin wall O.D. 1.52"/38.6mm I.D. 1.40"/35.46mm (Blue Tube 2.0)

Thick wall O.D. 1.52"/38.6mm I.D. 1.37"/34.80mm (MadCow G12)

*

38mm Nosecone Sled

*

38mm Battery Holder

$15.95

The enclosed bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional enclosed bay for trackers or other electronic devices (customer supplies coupler tube, electronic device, and batteries).

The electronics bay is completely self-contained with an accessible power switch installed in the cap at the rear of the bay. The cap also supplies mounting for a kevlar cord tie plate that has been tested to 150 pounds of static weight without breaking.

For an electronic devices, you choose what type of sled you require for your bay. If you do not find your specific device as an option, please contact us and we will review the device you want to use and let you know if a sled is possible in the nosecone bay. If it is, we will design one for you at no charge other than the cost of a similar sled in the the bay kit.

Currently Supported Devices

  • EggFinder Mini
  • MissileWorks RTx Flush mount GPS
    • MissileWorks recommends a 1S LiPo battery

Currently Supported Batteries

  • Turnigy Nano-Tech LiPo 2S 950mAh 25-50C
  • Venom 300 / Turnigy Nano-Tech LiPo 2S 300mAh 35-70C
  • Turnigy Nano-Tech LiPo 1S 750mAh 35-70C

Contents

  • one 38mm Power Switch Cap
  • one 38mm CT Sled mount
  • one 38mm CT Tie Plate
  • one 38mm End Plate
  • one 38mm Deploy Mounting Ring
  • one 38mm Blank Plate
  • selected sled
  • selected battery holder
  • wire, kevlar cord, and all necessary hardware to assemble the bay

Customer Supplied Parts

  1. One 38mm coupler
  2. One supported device
  3. One supported battery

Specifications

  • Diameter 35.1mm
  • Length EggFinder Mini - 179mm overall and 165mm in the coupler tube (antenna inside bay) 40g
  • Length MissileWorks RTx - 204mm overall and 190mm in the coupler tube (wire antenna) 45g
  • requires a 165mm or 190mm long coupler tube depending on device
Customers who bought this item also bought

38mm Nosecone Bay Kit

BKNC-20166
The nosecone bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional nosecone bay for trackers or other electronic devices (customer supplies coupler tube, electronic device, and batteries).
$13.95