38mm 6, 7, 8 Inch Bay Kit

The 38mm bay kit in a complete set of SMT Designs parts that can be assembled into fully functional dual deploy electronics bay (customer supplies coupler tube, altimeter, 2S LiPo battery, and PVC pipe ends).
Manufacturer: SMT Designs
SKU: BKC-20165
Shipping date: 2 - 14 business days depending on order size
*
*

Thin wall O.D. 1.52"/38.6mm I.D. 1.40"/35.46mm (Blue Tube 2.0)

Thick wall O.D. 1.52"/38.6mm I.D. 1.37"/34.80mm (MadCow G12)

*

Limited to very small altimeters such as StratoLoggerCF and RRC2+.

*
*
$22.95

The 38mm bay kit in a complete set of SMT Designs parts that can be assembled into fully functional dual deploy electronics bay (customer supplies coupler tube, altimeter, 2S LiPo battery, and PVC pipe ends).

The electronics bay is completely self-contained bay with an accessible through-wall arming switch. o-rings supply a seal between the bay and the outside air frames. The kevlar shock cords attach to a tie plate which has been tested to 150 pounds of static weight without breaking.

The kit is available for a 6, 7 and 8 inch long thin or thick walled coupler tube

Contents

  • two 38mm CT 2 Post Deploy Caps
  • two 38mm CT Deploy Mounting Rings
  • two 38mm CT Tie Plates
  • One Standard Sled
  • One 2S LiPo battery holder
  • One CT End Plate
  • One CT Radial Switch
  • wire, kevlar cord, and all necessary hardware to assemble the bay

Customer Supplied Parts

  1. One 6/7/8 inch thin or thick wall 38mm coupler.
  2. One supported altimeter.
  3. One 2S LiPo battery - The battery holder design requires a very specific format for the battery and should be a Venon Fly 30C 2S 300mAh 7.4V LiPo battery or exact equivalent (38 x 20 x 12 mm / 1.5 x 0.8 x 0.5 in).
  4. Two PVC pipe ends with 6-32 machine screws and nuts.
  5. Six 6-32 machine screws for attaching air frames to electronics bay coupler tube.

Specifications

  • Diameter 35.1mm/34.5mm
  • Length 203.2mm/8 inches, 228.7mm/9 inches or 254mm/10 inches
  • Weight 189g/6.7 ounces fully assembled with battery (6 inch bay)
  • requires 152.4mm/6 inch, 177.8mm/7 inch or 203.2mm/8 inch long coupler tube
Customers who bought this item also bought

38mm Nosecone Bay Kit

BKNC-20166
The nosecone bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional nosecone bay for trackers or other electronic devices (customer supplies coupler tube, electronic device, and batteries).
$13.95