38mm/BT60 MissileWorks T3 Nosecone Bay Kit

The nosecone bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional nosecone bay specifically for the MissileWorks T3 tracker and 1S 750mAh LiPo battery (customer supplies nosecone, T3, and battery).
Manufacturer: SMT Designs
SKU: TRB-43396
Shipping date: 2 - 14 business days depending on order size
*
$13.95

The nosecone bay kit is a complete set of SMT Designs parts that can be assembled into a fully functional nosecone bay specifically for the MissileWorks T3 tracker and 1S 750mAh LiPo battery (customer supplies nosecone, T3, and battery).

The electronics bay is completely self-contained with an accessible power switch installed in the cap at the rear of the bay. It is available to support Mach1 BT60 coupler tube, Wildman 38mm nosecones, and LOC Thick Walled Plastic nosecone (note: LOC nosecone must be modified to fit). Contact SMT Designs for assistance with other nosecone types.

The MissileWorks T3 must be the wire whip style (the RPSMA type antennas will be to long to fit the nosecone length).

Supported devices

  • MissileWorks T3 Tracker
  • 750mAh 1S LiPo battery

 

Mounting to the nosecone shoulder is accomplished by three 4-40 threaded inserts at 120 spacing around the perimeter of the cap. A end accessible arming screw is used to power the tracker on and off.

Contents

  • one Power switch cap
  • device platform for the device
  • battery holder and cables
  • shocl cord tie
  • wire, kevlar cord, and all necessary hardware to assemble the bay
  • one 4-40 Pan Head arming screw
  • three 4-40 flat head screws for mounting the bay in the end of the coupler tube

Customer Supplied Parts

  1. One supported nosecone
  2. One MissileWorks T3 tracker
  3. One 750mAh 1S LiPo battery

Modifications necessary to use the LOC nosecone and this bay

  1. Cut shock cord loop end of shoulder off as close as possible to the end to keep shoulder length as long as possible
  2. Bore out shoulder diameter to 33.5mm / 1.32 inches (this reduces the shoulder wall thickness to 2.5mm / 0.1 inches
Customers who bought this item also bought

54mm, 65mm, 75mm Hybrid Bay Kits

BKC-20587
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$24.95

MissileWorks T3 Receiver Case Kit

TRRX-43197
The MissileWorks T3 Receiver Case Kit is a complete set of SMT Designs parts that can be assembled into a handheld case (belt clip included) specifically for the MissileWorks T3 receiver and 1S 750mAh LiPo battery (customer supplies T3 receiver, RPSMA antenna, and battery).
$24.95