2.5 Inch (63mm) Fin Holder

The 2.5 Inch (63mm) Fin Holder is designed to hold a single fin in place while the root tab is glued in place whether it is a through wall or air frame surface mount.
Manufacturer: SMT Designs
SKU: FNH-01653
Shipping date: 5 - 40 days depending on order size
$9.45

The 2.5 Inch (63mm) Fin Holder is designed to hold a single fin in place while the root tab is glued whether it is a through wall or air frame surface mount. There is a 4-40 machine screw that can be tightened to keep the holder in place on the air frame.  A small spring clamp (not included) can be used, if needed, on the fin slot.

This specific fin holder is designed for the 2.5 inch tubing that was used in some of Estes' earlier rockets such as the Pro Series II Impulse.

Contents

  • One 2.5 Inch (63mm) Fin Holder

Specifications

  • Diameter (inside) 62.5-63.5mm
  • Height 65.2mm
  • Width 128mm
  • Weight 40g
Customers who bought this item also bought

MissileWorks LCD Field Case Kit

FLDC-45198
The MissileWorks LCD Field Case Kit is a complete set of SMT Designs parts that can be assembled into a handheld case specifically for the MissileWorks LCD display module that is used for programming their RRC3 and RRC2L altimeters (customer supplies LCD display module).
$14.95

Hybrid Bay Battery Carrier Kits

BYC
The Hybrid Bay Battery carriers are used to hold smaller batteries (9 V sized and select LiPos) in SMT Designs hybrid bays or bay adapters.
$3.45

Hybrid Bay Device Carrier Kits

HDC-BTDC
The Hybrid Bay Device carriers are used to mount smaller electronic devices (RRC2+ sized) in SMT Designs hybrid bays and bay adapters. Of note, the device carriers can be used as small footprint device mounts for more traditional bay designs or coupled with SMT Designs' bay adapters for even more versatility.
$2.95

75mm Fin Holder

FNH-00753
The 75mm Fin Holder is designed to hold a single fin in place while the root tab is glued in place whether it is a through wall or air frame surface mount.
$10.95